1. Verify the Power Source

• Check the power outlet.
  • Plug in a different device (e.g., a phone charger, lamp) to see if the outlet is working.
  • If the outlet isn’t working, try a different one or reset your home’s breaker if necessary.
• Inspect the power cord.
  • Ensure the cord is firmly connected to the Hydropixel’s power inlet.
  • Look for signs of damage (fraying, cuts, or loose connections). If the cord is damaged, discontinue use and contact support for a replacement.
  • If possible, locate a replacement cable and swap with existing power cable.
• Still no beep? Move to step 2.

2. Verify screen buttons work

• Press the buttons on the screen.
  • See if the buttons light up and flash. Does the screen not turn the machine on and off?
  • This indicates a touchscreen issue; please contact the Aquaria team at this point
• If the buttons do not light up, move to step 3

3. Check whether or not power cord is plugged in correctly and check fuse.

• See image below to locate fuse.
• Unplug power cable, and use leverage with a small screwdriver to pry out the fuse.
• Is the fuse burnt out?
  • It needs to be replaced; please contact the Aquaria team at this point
• Fuse appears normal? Move to Step 4.

4. Open the side door

• Check whether indicator lights on the main control panel are on (top left highlighted item in screenshot)
• If the light is on, check to see if terminals on the board are loose or disconnected.
  • Check to see if white wires (bottom right highlighted in the image) are loose or disconnected
• If light is off, check whether the light is on in Step 5.